Web designing in a powerful way of just not an only professions. We have tendency to believe the idea that smart looking .
Voltage | 24 |
Axial Acceleration | 13.9m/s2 at 45 Degree Direction |
Blade Types | Super Steel |
Buffer Memory | 2MB |
Command Sets | GP-GL / HP-GL(TM) (Set by command or auto-detect) (*2) |
Cutting Force | Max. 4.41N (450gf) |
Display | Graphic Type LCD With Back Light (240dots x 128dots) |
Max. Cutting Speed | 1000mm/s at 45 Degree Direction |
Minimum Character Size | Approx. 5 mm Alphanumeric |
Mountable Media Width | Min. 50mm, Max. 1626mm (64inch) |
Mountable Number Of Tools | 1 Tool |
Number Of Push Rollers | 2 Rollers |
Pen Types | Oil Based Ballpoint Pen, Water Based Fiber Tip Pen |
Power Source | 240V AC, 50 / 60 Hz |
Repeatability | Max. 0.1 mm in Plot up to 2 m |
Power Consumption | Up to 100W |
Maximum Cutting Force | 4.41 N (450 gf) in 38 Steps |
Media Types | Up to 0.25mm Thickness |
External Dimensions (Approx. W x D x H) | 1916x1148x1215 mm |
Weight (Approx.) | (59.5kg) |
Driven Type | Electric |
Blade Material | Stainless Steel |
Supported Software | Graphtec Pro Studio(Windows)(*5), Graphtec Studio(Mac), Cutting Master 4(*5), Windows Driver |
Mechanical Resolution | 0.005mm |
Interface | USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX |
Mountable Roll Media Mass | 20 kg |
Main Features:
Max. cutting force 4.41N (450gf) and Max. cutting speed 1000mm/s1With maximum cutting force 4.41N (450gf) and maximum cutting speed 1000 mm/s (*1), it enable to cut various media with high productivity.
Cutting performance that guaranties accurate 5m length cutting. (*2):
The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating.In addition, by using an optional special basket, stability in long cuts can be achieved.(*2) In case that using optional baskets of CE7000-60/130/160 and cutting media and conditions specified by Graphtec.
Data output via USB flash memory without PC:
When cutting data designed with Cutting Master 4 or Graphtec Pro Studio / Plus are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.* The USB memory format only supports FAT32.*Please note that NTFS and exFAT are not supported.
Carrier Sheet Table:
It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.* Available with CE7000-40 / -60.* In case that using carrier sheet “CR09300-A3”, Please use together with carrier sheet table “OPH-A45”.
User-friendly control panel:
Improved ARMS for high precision cutting (ARMS 8.0):
The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency boosting features improve productivity for Print & Cut applications such as stickers and decals.
Data Link Function:
(Barcode Data Management/Continuous Cutting)By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.* The USB flash memory format only supports FAT32.*Please note that NTFS and exFAT are not supported.
Continuous Cut:
(Data Link function)Barcode data management allows cutting different data sequentially by detecting the “Start Mark” of the new Barcode. Sequential Print & Cut process with roll-media is now available.Graphtec Pro Studio (Windows)Easy-to-use application software for creating original designs.It has many enhanced functions such as auto-shapes, shading, and editing functions. It can also configure the cutting conditions and other setting on plotter. EPS, Ai, CMX, and PDF file formats are supported. Graphics created with other popular design software can be imported into the software.For customers who need enhanced functions, the optional Graphtec Pro Studio Plus is also available.
Graphtec Studio (Mac)
This is an easy-to-use application software for Mac OS to create original designs.Images can be easily created by using the program icons that are arranged around the drawing area.
Command | HPGL |
Control System | Risc Micro-Controller |
Cutting Force | 10-500 g |
Cutting Size | 620mm |
Cutting Size (mm) | 600 |
Cutting Speed | 600 mm/s |
Drive Type | Stepper Motor |
Interface | 232/USB |
LCD Display | English |
Media Size (mm) | 720 |
Model Number | 720C |
Power | 90~240V / 50~60Hz |
Repeatability(mm) | 0.01 |
Resolution | 1000 DPI |
Size | 800mm |
Voltage | 90~240 V |
Warranty | 12 Months |
Product Details:
Cutting Plotter discription
Blade Material | Stainless Steel |
Driven Type | Electric |
Frequency | 50 Hz |
Humidity | 85% |
Max Cutting Width | 50 mm |
Power Required | 2.2 KW |
We at ‘A sign system” manufacturer and supplier of High quality Cutting Plotter Machine with best price also giving Reparing service.
Command | HPGL |
Cutting size | 620 mm |
Cutting Speed | 600 mm/s |
Interface | 232/USB |
Media Size | 720 mm |
Model | RS720C |
Repeatability | 0.01 mm |
Resolution | 1000 DPI |
Voltage | 90~240V |
Warranty | 12 Months |
Cutting Force | 10-500 g |
Brand/Make | Redsail |
Frequency | 50~60Hz |
We have marked a distinct and dynamic position in the market by providing a high-quality array of Redsail Vinyl Cutting Plotter.
Brand | Silhouette Cameo |
Dimension | 22.5 in. x 8.5 in. x 6 in. |
Max Cutting Area | 12 in. x 12 in. (mat),12 in x 10 ft. (roll) |
Max Cutting Force | 210 gf |
Max Media Thickness | 2 mm |
Model | Cameo 3 |
Weight | 8 lbs ( 15 oz) |
We have recently launched Silhouette Cameo Plotter to match customers increasing demands of customized cutting options.
Features:
Upper Material | Steel |
Model Type | Cutting Plotter Stand |
Brand | Graphtec |
Material | Alluminium |
Capacity | Cutting Plotter Machine |
Product Details:
Cutting plotter CE7000 series, Price Performance Leader
The CE7000 series sets the standard for high performance, low cost cutting plotters. It is equipped with professional-level features such as registration mark sensing and perforation cutting for producing a dividing line of labels or packaging mock-ups. The advanced features of the CE6000 series improve your work efficiency and increases productivity.
Reliable long length tracking:
The new media stocker ensures a more stable media feed.
A brake system is built in to prevent uncontrolled roll media unwinding. It assists the correct loading of heavy roll media.
On the CE7000-120/120-AMO, the pressure of the center push roller has two settings to suit all media. It prevents media lifting without leaving a trace mark on the media and provides for stable long-length cutting.
The optional basket provides long-length cutting even further
Automatic paneling:
Auto-paneling is a new feature that automatically splits long-length jobs into smaller pages that are cut sequentially but without any gaps. The result is a seamless, long-length finished job. Media movement is limited to the smaller page being cut, improving accuracy and tracking.
Auto mark detection:
The first registration mark is automatically detected within a wide search area; this eliminates the need to manually move the sensor near the registration mark position.
Subsequent marks are automatically located which improves the operability of the registration mark searching.
Expanded effective cutting area:
The new fifth generation ARMS system expands the cutting area to include outside of the area enclosed by the registration marks. This increase the production efficiency by reducing media waste.
Auto sensitivity adjustment:
The sensitivity of the registration mark sensor is automatically set by measuring the reflection level of the mark and the background of the actual media.
The mark can be detected when the color of the mark has a reasonable contrast against the background. For example, a white mark can also be detected on a coloured background.
Copy with ARMS:
The COPY key has now been added to the control panel to allow fast access for making multiple copies of the downloaded data. It also supports the cutting data including the ARMS control command for processing multiple sheets without a PC.
Reduce detection time:
Sequence of scanning the mark is changed for significantly reducing the mark detection time. Mark detection is possible at 1/2 of the conventional model.
Easier to cut in simple operation mode
Two set up menus, Simple and Normal, are available and can be chosen by the operator as desired.
In the Simple operation mode, selecting the type of media also sets the necessary cutting conditions.
Simple mode: Basic menus to ensure easy operation are displayed.
Normal mode: Menus for setting of all the functions are displayed.
New large LCD for easy menu settings
Settings of the CE6000 can be easily set up using the large LCD (240 x 128 dots) and tactile control panel.
It is icon driven and can be set up in 10 languages.
(English, French, German, Italian, Portuguese, Spanish, Russian, Korean, Chinese (Simple), and Japanese)
Paper Size | All |
Input Voltage | standerd |
Frequency | standerd |
Brand | As per requirement |
Automation Grade | Automatic |
Capacity | High |
We are trading and manufacturing Graphtec Keypad in Ahmedabad, Gujarat. Kindly contact us for further inquiry.
Usage | Radium cutting |
Max Cutting Speed | High |
Max Cutting Width(mm) | 50 mm |
Printing Speed | 600 mm/s |
Media Thickness | 0.25 mm |
Model | CE 7000/60 |
Printing Resolution | 0.005 mm (0.002in) |
Printing Width | Min 2 inch, Maximum 19.1 inch |
Software | Flexi Sign |
Printing Speed | 1-10, 15, 20, 25,30, 35, 40, 45, 50, 55, 60 cm/s |
Brand/Make | Graphtec |
By leveraging upon our huge industry experience, we provide the best quality array of CE5000-40-CRP PI Cutting Plotter Machine.
Power Required | 2.2 kW |
Brand/Make | Black Lion |
Frequency | 50 Hz |
Max Cutting Width | 50 mm |
Blade Material | Stainless Steel |
Driven Type | Electric |
Classification | Single-blade Cutter |
We are trading and manufacturing Radium Vinyal Cutting machine in Ahmedabad, Gujarat. Kindly contact us for further inquiry.
Drive Motor | Stepper motor |
Maximum Cutting Length | 50m |
Maximum Cutting Width | 600mm |
Power Consumption | 65.5 watts |
Model/Type | AR-24 |
Maximum Cutting Speed | 552 mm /sec |
Buffer Memory | 32 MB |
Brand/Make | GCC Inovation |
Max Cutting Width | 600mm (23.6″) |
Driven Type | Electric |
Features: Superior functionalityGuarantee 1meter trackingDual port connectivityUser-friendly interfaceWindows Drivers.
Compatible OS *2 | Windows 10 / 8.1 / 8 / 7 / Vista , Mac OS 10.6 to 10.10 |
Compatible Standards | Safety: cUL / CE mark, EMC: VCCI Class A / FCC Class A / EN55022 Class A |
Display Type | Graphic type LCD with backlight (240dots x 128dots) |
External dimensions (W x D x H, Approx. [mm]) | 1541 x 736 x 1250 |
Included software *2 | Windows Driver, Graphtec Studio, Cutting Master 3, Plotter Controller |
Interface | RS-232C / USB2.0 (High Speed) |
Mark Scanning Margin | Type 2 mark: Front 17 mm, Rear 37 mm, Left/Right 15 mm (Length of media up to 2 m) |
Max. Acceleration | 13.9 m/s2 (at 45 Degree direction) |
Max. Cutting Area (Guaranteed cutting area) | 1213 mm x 50 m *1 (1194 mm x 5 m *1) |
Max. Cutting orce (Instantaneous max. force) | 4.41 N (450 gf) in 38 steps (4.9 N (500 gf)) |
Media Type | Self-adhesive marking film (vinyl, fluorescent, reflective) excluding high-intensity reflective fil |
Perforation Cutting | Yes (Performed By Force Control) |
Registration Mark Sensing System | Scans the mark by optical sensor (ARMS5.0) |
Repeatability | Max. 0.1 mm in plot up to 2 m *1 |
Brand | Graphtec |
Power Source | 100 to 120, 200 to 240 V AC (Auto switch), 50 / 60 Hz |
Power Consumption | 120 VA |
Pen Types | Oil-Based Ballpoint, Water-Based Fiber-Tip pen |
Operating Environment | 10 to 35 D C, 35 to 75 % R.H. (non-condensing) (16 to 32 D C, 35 to 70 % R.H. (non-condensing)) |
Number Of Push Rollers | 4 Rollers |
Mountable Number Of Tools | 1 Tools |
Minimum Character Size | Approx. 5 mm alphanumeric (varies depending on character font and type of media) |
Max. Cutting Speed | 1000 mm/s (at 45 Degree direction) |
Configuration | Grit Rolling Type, Digital Servo Drive |
Command Sets | GP-GL / HP-GL(TM) emulation (Set by the menu or the command, and selects from GP-GL, HP-GL(TM), or Auto de |
Buffer Memory | 2 MB |
Blade Types | Supersteel |
CPU | 32-bit CPU |
Weight | 40.5 kg (including stand) |
Product Details:
Cutting plotter CE6000 series, Price Performance Leader
The CE6000 series sets the standard for high performance, low cost cutting plotters. It is equipped with professional-level features such as registration mark sensing and perforation cutting for producing a dividing line of labels or packaging mock-ups. The advanced features of the CE6000 series improve your work efficiency and increases productivity.
Reliable long length tracking:
The new media stocker ensures a more stable media feed.
A brake system is built in to prevent uncontrolled roll media unwinding. It assists the correct loading of heavy roll media.
On the CE6000-120/120-AMO, the pressure of the center push roller has two settings to suit all media. It prevents media lifting without leaving a trace mark on the media and provides for stable long-length cutting.
The optional basket provides long-length cutting even further
Automatic paneling:
Auto-paneling is a new feature that automatically splits long-length jobs into smaller pages that are cut sequentially but without any gaps. The result is a seamless, long-length finished job. Media movement is limited to the smaller page being cut, improving accuracy and tracking.
Auto mark detection:
The first registration mark is automatically detected within a wide search area; this eliminates the need to manually move the sensor near the registration mark position.
Subsequent marks are automatically located which improves the operability of the registration mark searching.
Expanded effective cutting area:
The new fifth generation ARMS system expands the cutting area to include outside of the area enclosed by the registration marks. This increase the production efficiency by reducing media waste.
Auto sensitivity adjustment:
The sensitivity of the registration mark sensor is automatically set by measuring the reflection level of the mark and the background of the actual media.
The mark can be detected when the color of the mark has a reasonable contrast against the background. For example, a white mark can also be detected on a coloured background.
Copy with ARMS:
The COPY key has now been added to the control panel to allow fast access for making multiple copies of the downloaded data. It also supports the cutting data including the ARMS control command for processing multiple sheets without a PC.
Reduce detection time:
Sequence of scanning the mark is changed for significantly reducing the mark detection time. Mark detection is possible at 1/2 of the conventional model.
Easier to cut in simple operation mode
Two set up menus, Simple and Normal, are available and can be chosen by the operator as desired.
In the Simple operation mode, selecting the type of media also sets the necessary cutting conditions.
Simple mode: Basic menus to ensure easy operation are displayed.
Normal mode: Menus for setting of all the functions are displayed.
New large LCD for easy menu settings
Settings of the CE6000 can be easily set up using the large LCD (240 x 128 dots) and tactile control panel.
It is icon driven and can be set up in 10 languages.
(English, French, German, Italian, Portuguese, Spanish, Russian, Korean, Chinese (Simple), and Japanese)
Max Cutting Width | 24 inch |
Max Cutting Width(mm) | 250 mm |
Max Cutting Speed | 600 mm/sec |
Max Cutting Force | 450 gf |
Print Application | Print And Cut |
Cutting Speed | 10-800mm/s (31.5ips) |
Max Paper Feed Width | 720 mm |
Voltage | 220V AC |
Brand/Make | Angel |
Weight | 14.2 Kg |
RAM | 2 Mb |
Max Cutting Width | 630 mm |
Blade Material | Stainless Steel |
Driven Type | Electric |
Product Details:
Automation Grade | Automatic |
Material | Mild Steel |
Maximum Cutting Speed | 1000 mm/sec |
Phase | Three Phase |
Power Source | Electric |
Volatge | 240V |
Voltage | 220 V |
Blade Material | Stainless Steel |
Driven Type | Electric |
Max Cutting Width | 630mm |
Max Plotting Speed | 600mm/s |
RAM | 2MB |
Blade Material | Stainless Steel |
Brand / Make | Angel |
Classification | Single Blade Cutter |
Driven Type | Electric |
Max Cutting Width | 630 mm |
Weight | 14.2 kg |
Being one of the trusted firms in the industry, we are highly engaged in providing a unique range of Angel Vinyl Cutter Plotter.
Supported Media width | Multiple |
Print Application | Plotter |
Max Cutting Speed | Variable |
Imaging technology | advanced |
Product description | Plotter |
Cutting Material | Acrylic |
Brand | A sign |
Phase | Single |
Automation Grade | Automatic |
Type of Machine | CO2 Laser Cutting Machine |
Capacity | High |
Laser Power | 100 W |
Product Details:
Prytec Laser Systems are designed to cut and etch all sorts of materials including acrylics with ease, leaving you a beautiful polished finished edge, it will also etch text and graphics in high detail.
The 1300 mm x 900 mm working area is ideal for medium to large engraving and cutting jobs.
Our 130W Laser Tube has a 6000+ hour life span and is easy and cost effective to replace. No re-gassing and no hefty costs in replacement tubes.
Easy to Use
The PLS Laser System has been developed with keeping ease of use in mind. Plugged in via USB cable the unit has a basic controller on the machine to move the machine to the location required (if working with an off-cut). All our PLS Laser systems have an auto-focus feature, ensuring that you are at the right height all the time.
The automated air assist automatically opens and closes the air valve so you do not have to flick a switch.
Materials
The Prytec Laser Systems can handle a wide variety of materials. You can Engrave onto acrylic, anodised aluminum, metals*, wood, leather, paper, fabric and more. You can also cut materials like Acrylic, fabric, leather, stamp material, timber etc. The effects and creations are up to your imagination.
A marking spray must be used to mark bare metals with a CO2 laser.
Features
All Prytec Laser Systems come with EngraveLAB software specifically designed and created for Prytec Laser Systems developed by CADLink.
EngraveLAB V10 Ruida Edition
Bundled with CADLinks EngraveLAB Ruida Edition software facilitates the production of a wide variety of jobs, from simple nameplates to elegant wood signs and luxury stationary. EngraveLAB Ruida Edition generates quality results with photos Bitmaps and Vector Art Work. The software imports designs in AI, EPS, PDF, DXF, BMP, JPG file formats. It also allows users to design and modify files to suit.
Engraving Scanning Speed | 600mm/s |
Frequency | 50 Hz |
Laser Type | CO2 |
Operation Mode | Automatic |
Laser Power | 60 to 300W |
Frequency | 50 Hz |
Automation Grade | Automatic |
Voltage | 240 V |
Laser Power | 100 W |
We are manufacturing Laser Cutting Machine in Ahmedabad, Gujarat. Kindly contact us for further inquiry
Pulse frequency | 20-100 kHz |
Voltage | 220V |
Automation Grade | Automatic |
Engraving Speed | 500mm/s |
Laser Power | 30-150W |
Print Application | All types |
Configuration | standerd |
Max Cutting Speed | Variable |
Product description | Vinyl cutting plotter |
Cutting Speed | 500 mm/s |
Cutting Width | 600 mm |
Max Cutting Speed | 900mm |
Number of Push Rollers | 2 |
Power Consumption | 100W |
Voltage | 12V |
RAM | 2MB |
LCD Display | yes |
Cutting Size | As per client requirement |
Power Supply | Electric |
Model | 720 |
Brand | Redsail |
we “A Sign Systems” are a leading Wholesale Trader and Manufacturer of a wide range of Cutting Plotter.
Cutting Material | Non metal |
Type of Machine | Non Metal Laser Cutting Machine |
Capacity | Multiple |
Laser Power | 100 W |
Working Temperature | 18- 35 degree celsius |
Cooling Mode | Water cooling and protection system |
Laser Type | CO2 Laser |
Compatible Software | Corel Draw, AutoCAD, Photoshop |
Voltage(Volt) | AC 220 V |
Automation Grade | Automatic |
Cutting Speed | 0-1000mm/min |
Laser Power | 80W, 100W,150W |
Operation Mode | Automatic |
Material | MS |
Automation Grade | automatic |
Type of Machine | MDF Laser Cutting Machine |
Capacity | High |
Auto Contour Cut | Camera |
Connector Interface | USB Flash/WIFI(option)/USB Cable |
Core lDRAW Directly | Yes |
Cutting Precision | +/- 0.01mm |
Floor Stand | No |
Laser Engrave Option | Yes |
Max Contour Cutting width | 350mm |
Max Cutting Speed | 600mm/s |
Max Cutting width | 390mm |
Max Force | 800gm |
Max Media Width | 500mm |
Max Moving Speed | 700mm/s |
Motor | Stepper |
Number Of Heads | 1 |
Packing Gross Weight | 11Kg |
Packing Size | 770*310*265mm |
Power | < 100W |
Power Supply, V/Hz | 24V 1.5A |
Processor Memory | 128MB |
Repeat Precision | 0.082 mm |
Scratch Engrave Tool Option | Yes |
Working Environment | +5 Degree C – +35 Degree C |
Model Name/Number | SKYCUT C16 |
Brand | Skycut |
Auto Contour Cut | Camera |
Connector Interface | USB Flash/WIFI(option)/USB Cable |
CorelDRAW Directly | Yes |
Cutting precision | +/- 0.01mm |
Laser Engrave Option | Yes |
Max Contour Cutting width | 570mm |
Max Cutting Speed | 600mm/s |
Max Cutting width | 610mm |
Max Force | 800gm |
Max Media Width | 720mm |
Max Moving Speed | 700mm/s |
Motor | Stepper |
Number Of Heads | 1 |
Packing Gross Weight | 14Kg |
Packing Size | 1000*310*265mm |
Power | < 100W |
Power supply, V/Hz | 24V 1.5A |
Processor Memory | 128MB |
Repeat Precision | 0.082 mm |
Scratch Engrave Tool Option | Yes |
Working Environment | +5 DegreeC – +35 DegreeC |
Model Name/Number | SKYCUT C24 |
Brand | SKYCUT |
Auto Contour Cut | Camera |
Connector Interface | USB flash/WIFI(option)/USB cable |
CorelDRAW Directly | Yes |
Cutting Precision | +/- 0.01mm |
Floor Stand | No |
Frequency | 50Hz |
Interface | Touch Screen |
Laser Engrave Option | Yes |
Material | Stainless Steel |
Max Contour Cutting width | 220mm |
Max Cutting Speed | 600mm/s |
Max Cutting width | 260mm |
Max Force | 800g |
Max Media Width | 370mm |
Max Moving Speed | 700mm/s |
Number Of Heads | 1 |
Packing Gross Weight | 9kg |
Packing Size | 640*310*265mm |
Phase | Single Phase |
Power | < 100W |
Power Supply | 24V 1.5A |
Power Supply, V/Hz | 24V 1.5A |
Pressure | 50g-800g |
Processor Memory | 128MB |
Repeat precision | 0.082 mm |
Scratch Engrave Tool Option | Yes |
Volatge | 220V |
Weight | 14kg |
Working Environment | +5 DegreeC – +35 DegreeC |
RAM | 2MB |
Model Name/Number | SKYCUT C10 |
Large touch screen menu
Camera for auto contour cutting
Fully Adjustable Pinch Feed
Metal body
Plate Size | 20″ x 24″ |
Production Capacity | 500 prints/hour |
Usage/Application | Heat Transfer |
Printing To Be Done On | t shirt , Mug |
Temperature | 100 degree Celsius |
Heating Plates | Curved |
3D Sublimation Machine | Customized |
For Paper | Customized |
Machine Type | Automatic |
Capacity | Hi range |
Usage/Application | 3D sublimation |
Printing To Be Done On | tshirt , mug and all surface |
Laser Type | Fiber laser |
Marking Area | As per requirement |
Marking Speed | 10000 mm/s |
Usage/Application | Fibre laser marking |
Marking Speed Capacity | 10000 mm/s |
Approximate Size | 600x300mm |
Phase | Single Phase |
Power | 30Kw |
Series | RDC6445G(EG) |
Weight | 2.86 |
Voltage | 220V |
Current | 2 A |
Usage/Application | Industrial |
We at ‘A sign system” manufacturer and supplier of High quality Co2 Laser controller with best price also giving Reparing service.
Usage/Application | Laser Cutting Machine |
Brand | A Sign System |
Machine Type | Laser Cutting |
Cutting Speed | 0 to 30 |
Laser Power | 60 volt to 800 Volt |
Capacity | 10 mm thickness |
Brand | Graphtec | |||
Model Type | Grit Rolling Plotter | |||
Model Name/Number | CE7000-60 | |||
Voltage | 100V to 240V AC | |||
Printing Speed | NA | |||
Supported Media width | 24inch | |||
Items | CE7000-60 | |||
Configuration | Grit rolling type | |||
Max. cutting area (W x L) (*1) | 603mm × 50mm | |||
Cutting area of guaranteed accuracy (*1) | 583m × 2m | |||
Mountable roll media mass | 9 kg | |||
Number of push rollers | 2 rollers | |||
Max. cutting speed | 900mm/s ,at 45° direction | |||
Acceleration | 21.2 s2 at 45° direction | |||
Cutting force | Max. 4.41N (450gf) | |||
Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) | |||
Mechanical resolution | 0.005mm | |||
Programmable resolution | GP-GL 0.1/0.05/0.025/0.01 HP-GL™ (*2 0.025 | |||
Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) | |||
Mountable number of tools | 1 tool | |||
Blade types | Supersteel | |||
Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen | |||
Media types | Up to 0.25mm thickness, Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) | |||
Interface | USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX | |||
Buffer memory | 2MB | |||
Command sets | GP-GL / HP-GL™ (Set by command or auto-detect) (*2) | |||
Display | Graphic type LCD with back-light (240dots x 128dots), supports 10 languages | |||
Power source | 100V to 240V AC, 200V to 240V AC, 50 / 60 Hz | |||
Power consumption | Up to 100W | |||
Operating environment | 10 to 35 ºC, 35 to 75 % R.H. (non-condensing) | |||
Guaranteed accuracy environment | 16 to 32 ºC, 35 to 70 % R.H. (non-condensing) | |||
Brand | Graphtec | |||
Model Type | Grit Rolling Cutting Plotter | |||
Model Name/Number | CE7000-130 | |||
Voltage | 100V to 240V AC,200V to 240V AC,50 / 60 Hz | |||
RAM | 2MB | |||
Cutting Force | Max. 4.41N (450gf) | |||
Max. Cutting Speed | 1000mm/s at 45 Degree direction | |||
Minimum Character Size | Approx. 5 mm alphanumeric (varies depending on character font and media) | |||
Number Of Push Rollers | 4 rollers (Max. 5 (option)) | |||
Minimum Order Quantity | 1 | |||
Items | CE7000-130 | |||
Configuration | Grit rolling type | |||
Drive method | Digital servo drive | |||
Max. cutting area (W x L) (*1) | 1270 × 50 | |||
Cutting area of guaranteed accuracy (*1) | 1250 × 2m | |||
Mountable media width | 1372mm (54inch) | |||
Mountable roll media mass | 17 kg | |||
Number of push rollers | 4 rollers (Max. 5 (option)) | |||
Max. cutting speed | 1000mm/s at 45° direction | |||
Acceleration | 13.9m/s2 at 45° direction | |||
Cutting force | Max. 4.41N (450gf) | |||
Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) | |||
Mechanical resolution | 0.005mm | |||
Programmable resolution | GP-GL0.1/0.05/0.025/0.01 HP-GL™ (*2)0.025 | |||
Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) | |||
Mountable number of tools | 1 tool | |||
Blade types | Supersteel | |||
Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen | |||
Media types | Up to 0.25mm thickness ,Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) | |||
Voltage | 220V |
Working Principle | Auto Feed, Auto Slot Auto Bend |
Applied Material | Flat Aluminum, Aluminum Profile, Channelume |
Material Height | Less than or equal to 130 mm |
Slot Degree | Max. 135 Degree |
Material Thickness | 1.0 mm |
Slot Type | Double Size Swing Slotting |
Weight | 240 Kg |
Control Type | Computer Control |
Total Power | 1500W |
File Format | DXF, PLT (CorelDraw) |
Machine Size | 1250 x 1300 x 720mm |
Packing Size | 1350 x 1500 x 820mm |
Model | A130 |
Brand | Dobosen |
Features:
Application:
Usage/Application | Industrial |
Automation Grade | Fully-automatic |
Power | 1500W |
Voltage | 220V |
Input File Format | DXF,PLT,Al |
Max Process Thickness | 1.2mm |
Model Name | S140 RU |
Total Weight | 480KG |
Model Number | S140RU |
File Format | DXF,PLT,Al |
Package Size | 1700*850*1850mm |
Bending Method | Accurate and scalable dual tool rod bending |
Processing Height | 140mm |
Profile Thickness | 1.0mm |
Working Principle | Auto feed,Auto slot,Auto bend |
Control Type | Computer control |
DOBOSEN S140RU high speed channel letter machinery
channel letter bending machine is mainly used in signage industries for making various signs from metal.Our channel letter bending machine can be worked on aluminium,steel and stainless steel as well.It was very efficient and fast to make various letter using computer and associated software.
1.Automatic punching function,Instead of manual drilling
2.Octagonal machine knife tool,Durable,Not easy to break when cutting,Welding save effort.
3.The key components adopt casting process,Strong,Reliable precision
4.Double screw drive,Parallel double manupulator clamping reciprocating feeding,Accurate and smooth
5.precision double cutter bar,altermatly telescopic bending system high speed,high forming degree
Model Type | CE7000-60 |
Axial Acceleration | 21.2m/s2 at 45 Degree Celsius Direction |
Configuration | Grit Rolling Type |
Cutting Force | Max. 4.41N (450gf) |
Max. Cutting Speed | 900mm/s at 45 Degree Celsius Direction |
Minimum Character Size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
Mountable Media Width | 50mm, Min. 484mm (19inch) Max. |
Number Of Push Rollers | 2 |
Programmable Resolution | GP-G: 0.1/0.05/0.025/0.01mm, HP-GL (*2), 0.025mm |
Brand | Graphtec |
Drive method | Digital Servo Drive |
Max. cutting area (W x L) | 603mm x 50m |
Cutting area of guaranteed accuracy (*1) (When using optional basket) | 583mm x 2m (583mm x 5m) |
Mountable roll media mass | 5 kg |
Mechanical resolution | 0.005mm |
Details:
Product description | mimaki cutting plotter machine |
Supported Media width | 90~740mm(3.5″-29.1″) 90~1,250mm(3.5″-49.2″) 901~1550mm(3.5″-610″) |
RAM | 27 mb |
Dimensions without stand (W x D x H) | 1810*580*1160mm |
Country of Origin | Made in India |
ITEM | CG-60AR | CG-100AR | CG-130AR |
Applicable media width | 90-740mm | 90-1250mm | 90-1550mm |
Cuttable area | 606mm X 51m | 1070 mm X 51 m | 1370 mm X 51 m |
Maximum speed | Cutting:73 cm/s 45° direction:103 cm/s | ||
Settable speed | 1-10 cm/s ,10-73 cm/s | ||
Mechanical resolution | X axis:2.5 m ,Y axis :5 m | ||
Program step | 25,10 m /110,50 m | ||
Repetition accuracy | 0.2 mm /2 m | ||
Accuracy guarantee range | 586 mm X 2 m | 1050 mm X 2 m | 1350 mm X 2m |
MIMAKI CG- 60/100/130 AR Series cutting plotter
1.Realizing a cut pressure of 550 g, which is the highest in the entry class,expanding the range of cuttable materials.
2.The maximum cutting speed is 105% of the previous model for greater productivity.
3.New lineup options for cardboard full cutting
4.Easy to cut output from windows plotter driver
5.Equipped with an ID cut function, realizing efficient print & cut in seamless coordination with mimaki’s printers.
6.Various convenient functions
1: Maximum sheet feeding length differs depending on the software.
*2: Sheet width to cut off from the roll.
*3: Restricted sheet width.
*4: Provided that the blade specific to fluorescent type vinyl (SPB-0007) and the blade specific to reflective sheet (SPB-0006) are used.
*5: Pouncing tool intended specifically for pouncing shall be used.
*6: The goods on the market are φ8~φ9 Pen. Accuracy and image quality are not guaranteed.
| CG-75FXII Plus | CG-130FXII Plus | CG-160FXII Plus | |
Acceptable sheet width | 90mm~1,040mm (3.54″~40.9″) | 90mm~1,580mm (3.54″~62.0″) | 90mm~1,880mm (3.54″~74″) | |
Rolled media weight | 18kg (40 lb) or less | 22kg (49 lb) or less | ||
Roll outsied diameter | φ200mm (7.87″) or less | |||
Effective cutting area *1 | 760mm x 51m (29.9″ x 167′) | 1,300mm x 51m (51.2″ x 167′) | 1,600mm×51m (62.9″×167’) | |
Maximum auto cutting width *2 | 870mm (34.2″) | 1,425mm (56.1″) | 1,720mm (67.7″) | |
Maximum cutting speed | 100cm/s (39.3″/s) | |||
Maximum moving speed | 140cm/s (55″/s) (In a 45° direction and in a pen-up state) | |||
Adjustable speed range *3 | 1-10cm/s : 1cm step adjustment | |||
Mechanical resolution | 5µm (0.0002″) | |||
Command resolution | 25μm, 10μm(MGL-IIc), 100μm, 50μm(MGL-Ic1) | |||
Repeatability | ±0.2mm (Excluding shrinkage / expansion caused by the film temperature) | |||
Accuracy assurance range (Repeatability) | 760mm x 10m (29.9″ x 32.8′) | 1,300mm x 10m (51.2″ x 32.8′) | 1,600mm x 10m (63.0″ x 32.8′) | |
Max. pressure | 500g | |||
Range of down pressure | Cutter | 10~20g(2g step), 20~100g(5g step), 100~500g(10g step) | ||
Pouncing | 10~20g(2g step), 20~100g(5g step), 100~500g(10g step) | |||
Pen | 10~20g(2g step), 20~100g(5g step), 100~150g(10g step) | |||
Acceptable sheet *4 | Vinyl up to 0.25mm(0.01″)thickness, | |||
Acceptable sheet for pouncing *5 | Paper thickness: 0.06~0.13mm (0.0024″~0.005″) | |||
Applicable tools *6 | Cutter, Water based ball-point pen, | |||
Certifications | VCCI class A, FCC class A, ETL IEC 60950-1 | |||
Type of command | MGL-II c / I c1 | |||
Interface | RS-232C, USB | |||
Receiver buffer size | 30MB Standard (20MB when in sorting) | |||
Operational environment | Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing) | |||
Power requirement | AC100V~240V 1A 50/60Hz | |||
Power consumption | 100W or less | |||
Dimensions (WxDxH) | 1,285mm(50.5″)x | 1,825mm(71.8″)x | 2,125mm(83.6″)x | |
Weight (with stands) | 47kg (104 lb) | 62kg (137 lb) | 70kg (154 lb) | |
Beam quality | M2:1.2 (TEMOON) |
Average output power | 3W/5W/12W/18/ (optional) |
Laser Brand | Ingu |
The maximum marking speed | 1200mm/s |
Laser wavelength | 355nm |
Laser Repetition rate | 20KHz-200KHz |
Power adjustment range | 5%-100% |
Minimum Character | 0.2mmX0.2mm |
Marking Depth | 0.010.2mm |
Repeat accuracy | 0.001mm |
Minimum line width | 0.013mm |
Power consumption | ≤600w |
Cooling system | Air cooling |
Control interface | USB |
Working time | 24h |
Power requirement | AC220v/50Hz/2A |
Model | DM-C30 |
Max. Laser power | 30W |
Laser wavelength | 10.64um |
laser frequency | ≤20KHz |
Marking depth | ≤3mm |
Marking scope | 130x130mm |
Linear speed | ≤7000mm/s |
Min. linear width | 0.10mm |
Consumed power | 1.2KW |
Repeat accuracy | 0.002mm |
Min. character | 0.40mm |
Electricity source | 220V/50Hz/8A |
Location precision | 0.002mm |
Cooling system | Air cooling |
